Tampilkan postingan dengan label Mobile Repair. Tampilkan semua postingan
Tampilkan postingan dengan label Mobile Repair. Tampilkan semua postingan

Jumat, 03 Oktober 2014

Cell Phone Water Damage Repair Tips

Mobile Repair - You need to decide whether you’d prefer to have a super-sharp screen or killer battery life. The Lenovo Yoga 920 lasts hours longer than the HP, and performs better in benchmarks and games with the same CPU (although if this is thanks to the Meltdown vulnerability, the playing field is effectively levelled). lasvegas, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Mobile Repair, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Cell Phone Water Damage Repair Tips :

Cell phone water damage requires fast attention. If you wait too long, the damage may be just too much to be repaired. Dropping cell phones into the toilet, into a pool, into mud puddles, into washing machines and even into a glass of fruit juice is not very uncommon.

Get it out of the water as soon as possible. Most of the phones have the plastic cover lids pretty tight. It would take around 20 seconds for water to get through the covers and go inside. So, immediately remove the gadget from water. Worst case, if the phone is stuck or something, see if you can remove the battery at-least, that should prevent the short-circuit.

Switch the phone off. Once you take out the phone, switch it off. This is very important to prevent short circuits within the phone body. Remove the batteries carefully and let it dry.

Remove the SIM card. Your SIM might contain many of the important data like contact information and other stuff. It is very important to prevent damage to it. Remove it as soon as you can and let it dry. I have seen many people valuing their SIM more than the phone itself. In theory, SIM cards have better chances of surviving water damage, but that is only when you don’t let it heat but get it dry. All these are valid only if you are using GSM phones. CDMA phones do not contain SIM cards.

Dry your phone. Obviously, this is the most important step in the water damage control process. You need to remove as much water as possible from the cell phone. Shake it out (carefully) and use a cotton cloth or paper towel to gently remove the wetness.

Wet Mobile Phone Drying Tips
Hair Dryer: You think hairdryer can only help soaking your hairs? Well, not really, they can helpful drying your phone too. Switch on the hairdryer towards your phone with utmost attention to the battery. If you have speed control feature, make sure you keep it to low. if not, keep the hair dryer away from the cell phone. This is useful only to dry the outer parts. This is definitely not my preferred way to dry the wet phone, since the key is to make sure the phone doesn’t get heated up. so you would have to be very careful when using a hair dryer or a blower.
Alcohol: Place the device in the container and fill with denatured alcohol, or a 95% alcohol solution (regular rubbing alcohol is about 75%) completely submerging the device. The alcohol will displace any water left in your device. Jiggle the container around a bit to make sure the alcohol is able to drive out the water droplets in your device. You may need to weight your device to keep it under the water. Remove the device and put it somewhere to dry for an hour or two. The alcohol will evaporate very quickly but be sure it’s really dry. Make sure that the alcohol you use is denatured with only methanol as the chemicals found in other types can be damaging. This kind of alcohol can be purchased at your local hardware store. The alcohol soak may work best for phones that have been damaged by salt water or other liquids such as coffee.
Dry Rice: This is really interesting and proven method of drying your cell phone. Put the electronic device in a large Ziploc bag filled with dry rice. The rice acts as a desiccant to remove water from the air and aids in drying your device out quicker.



What NOT to do with a WET mobile phone?
Do NOT switch on the phone: I understand the urge to see if the phone is still functioning properly. But never ever try to switch it on when it is still wet.

Do NOT heat the phone: In order to quickly dry the phone, you might think of using a hair dryer at high speed or a vaccum cleaner or direct sunlight. This is a strict No-No. Avoiding the phone getting heated up is the key to save your wet phone.
Do NOT take it apart: Unless you are skilled enough with mobile phone parts.

After you have waited a day or so, make sure everything is clean and dry looking and re-attach the battery and reassemble your device to the phone and see if it works. If your phone does not work, try plugging it into its charger without the battery, if this works, you need a new battery. If not, try taking your cell phone to an authorized dealer. Sometimes they can fix it.

All mobile solution exclusive tips, Lost Mobile Tracking tips, Mobile, Mobile Care Tips, Mobile Codes, Mobile Servicing,

Sabtu, 27 September 2014

How to root Galaxy S3 on Mac

Mobile Repair - You need to decide whether you’d prefer to have a super-sharp screen or killer battery life. The Lenovo Yoga 920 lasts hours longer than the HP, and performs better in benchmarks and games with the same CPU (although if this is thanks to the Meltdown vulnerability, the playing field is effectively levelled). lasvegas, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Mobile Repair, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

How to root Galaxy S3 on Mac :
Rooting enables you to completely customize your Android device, those of you own a Samsung Galaxy S3 and looking for root but have Mac machine instead of Windows PC to root the phone via Odin, can easily root the Galaxy S3 on Mac OSX via Heimdall, once your phone is rooted, you’ll have full control over your Galaxy S3 and you’ll be able to install any app you want. 
Read on how to root Galaxy S3 on Mac, but do keep in mind it’s just for Galaxy S3 model number GT-I9300, don’t try it on US or Canadian variants. Make sure the battery of your phone is charged and be sure to make a backup of your device data such as SMS, internet setting, contacts music files etc because the below procedure may wipe data, you can sync your contacts with Gmail account and for messages use SMS apps, lastly use file expert app to backup apps. DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or gets damaged following this guide. Instructions Step #1: Download Rooting Package (GalaxyS3RootMac.zip) to your Mac.

Step #2: Unzip the GalaxyS3RootMac.zip file. Step #3: Make sure your Galaxy S3 isn’t plugged with your Mac and turn it off. Step #4: Reboot your Galaxy S3 into download mode/Odin mode, to do so reboot phone by holding down Volume Down, Center Home, and Power buttons until you see warning screen on the phone, then press Volume up button to enter in Download mode. Step #5: Plug your Galaxy S3 to your Mac using USB cable. Step #6: Open the folder where you’ve unzipped the downloaded GalaxyS3RootMac.zip file and run heimdall-suite-1.3.2-mac.dmg, start installation and once the Heimdall is installed, reboot your computer. Step #7: From your app folder, run Heimdall-frontend app. Step #8: Select “Flash” then “Browse” and select the file “s3pit.pit” in from the folder where you’ve unzipped the GalaxyS3RootMac.zip file. Step #9: Click on “Add”, then change Partition Name into “RECOVERY”. Then select “Browse” and select the file“recovery.img” from folder the same folder “GalaxyS3RootMac.zip”. Step #10: Click on Start button to start rooting. If you face errors on Heimdall and Kies is installed, try this terminal to fix errors: sudo kextunload -b com.devguru.driver.SamsungComposite sudo kextunload -b com.devguru.driver.SamsungACMData sudo kextunload -b com.devguru.driver.SamsungACMControl Step #11: Now transfer CWM-SuperSU-v0.87.zip file to your Galaxy S3 that have in GalaxyS3RootMac folder. Step #12: Turn off your Galaxy S3. Step #13: Reboot your Galaxy S3 into Clockwork Mod Recovery by holding down volume up, home and power buttons. Step #14: Once you’re in recovery mode, select “Install Zip from SD Card” then “Choose Zip from SD Card” and locate the downloaded CWM-SuperSU-v0.87.zip file that you’ve transferred in above step and confirm installation. Step #15: Once the installation is completed, select “Go Back” after that select “Reboot System Now” to reboot the phone. That’s it, your phone is rooted now with ClockworkMod Recovery installed, enjoy! Now you can install any root-required app on your phone.

Rabu, 24 September 2014

Sony Ericsson Xperia Arc lt18i LCD Display Light IC Jumper Problem Solution

Mobile Repair - You need to decide whether you’d prefer to have a super-sharp screen or killer battery life. The Lenovo Yoga 920 lasts hours longer than the HP, and performs better in benchmarks and games with the same CPU (although if this is thanks to the Meltdown vulnerability, the playing field is effectively levelled). lasvegas, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Mobile Repair, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Sony Ericsson Xperia Arc lt18i LCD Display Light IC Jumper Problem Solution

In Sony Xperia Handset if LCD light is not working of Arc lt18i model then we wont be able to watch any text on display. The Light of this set can be dim or may be blank. 

You have to apply a rules to solve this problem. Sony Ericsson Xperia Arc lt18i LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given as follows :

After removing all device of this set check mother board if there is any carbon water damage or rust.  Clean whole board with electronics cleaner, remove any dust of this board and then apply hot air for a few minutes so that it can be dry.


Now Replace led if it is a jack LCD and if it is pasted then after removing check its prints value. If value is ok then replace LCD and if value is missing then check whole parts components as I have given in above diagram. You have to Check all paths and if any tracks of them is missing apply jumpers.

It will help you to solve Sony Ericsson Xperia Arc lt18i LCD Display Light IC Problem easily.

Sony Ericsson Xperia Arc lt18i LCD Display Light IC Jumper Problem Solution

Mobile Repair - You need to decide whether you’d prefer to have a super-sharp screen or killer battery life. The Lenovo Yoga 920 lasts hours longer than the HP, and performs better in benchmarks and games with the same CPU (although if this is thanks to the Meltdown vulnerability, the playing field is effectively levelled). lasvegas, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Mobile Repair, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Sony Ericsson Xperia Arc lt18i LCD Display Light IC Jumper Problem Solution

In Sony Xperia Handset if LCD light is not working of Arc lt18i model then we wont be able to watch any text on display. The Light of this set can be dim or may be blank. 

You have to apply a rules to solve this problem. Sony Ericsson Xperia Arc lt18i LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given as follows :

After removing all device of this set check mother board if there is any carbon water damage or rust.  Clean whole board with electronics cleaner, remove any dust of this board and then apply hot air for a few minutes so that it can be dry.


Now Replace led if it is a jack LCD and if it is pasted then after removing check its prints value. If value is ok then replace LCD and if value is missing then check whole parts components as I have given in above diagram. You have to Check all paths and if any tracks of them is missing apply jumpers.

It will help you to solve Sony Ericsson Xperia Arc lt18i LCD Display Light IC Problem easily.